Neatcell Picosecond Laser Pen Light Therapy Tattoo/Spot Removal Pen

How To Use The Picosecond Pen:

Plug In & Power On: Connect via USB and turn on the device—the digital display will light up.

Adjust Settings: Use “Inten” and “Fre/Hz” buttons to select intensity and frequency. Always start at the lowest level and increase gradually.

Note: For the blue light pen, Level 9 is the lowest frequency.

Apply Anesthetic: Coat the treatment area with topical anesthetic cream to minimize discomfort.

Wear Protective Goggles: Ensure both the user and any assistants wear the included blue laser safety goggles.

Begin Treatment: Align the pen tip with the target area. For blue light, press and hold the switch for 1–2 seconds, then release. Repeat across the area.

⚠️ Do not hold on the same spot for more than 2 seconds.

Expected Reaction: Treated spots may appear darker immediately—this is normal. They will scab and naturally fade within days.

Post-Treatment Care: Apply repair serum immediately after use. Continue daily application for several days. Avoid sun exposure on treated areas to prevent irritation.

Repeat if needed: Allow skin to fully heal (7–14 days) before treating the same area again.

Important Notes:

• Please start from the Lowest Level, then slowly adjust the picosecond laser pen to the suitable level.
• Do not use irritating skin care products after therapy.
• Level 9 is the weakest, while ” 1 ” is the strongest. Please start from the weakest level.
• Pay attention to sun protection. The freckle treatment area is very sensitive to sunlight.
• Apply a hydrating mask after the picosecond laser therapy. It can alleviate dry and tight symptoms and accelerate the metabolism of the skin.
• Difference between Red light & Blue light pico-laser:
   – The power and effect of the blue light picosecond pen is stronger. It needs more professional operation. Please start from the lowest frequency, then slowly adjust to the suitable level.
   – The blue laser pen has 9 levels of frequency mode, different output frequencies, and a wavelength. The flash area is bigger.
   – The red laser pen has 3 Frequency modes, and its flash area is smaller. It is suitable for subtle operation.

Red Light vs. Blue Light: Which to Choose
Red Light Pen: Gentler power, suitable for personal home use and self-operation

Blue Light Pen: Higher intensity, faster results—recommended for assisted use or professional settings

If you have someone to assist you, the Blue Light Pen offers more powerful and efficient treatment.

⚠️ Important Safety Notes – Please Read Before Use
✅ Anesthetic is REQUIRED: Always apply topical anesthetic before treatment to minimize discomfort.
✅ Aftercare is ESSENTIAL: Use repair serums or creams post-treatment to support skin recovery.
✅ Eye Protection is MANDATORY: Wear the provided safety goggles at all times during operation.
❌ Do not use on broken, inflamed, or sensitive skin.
❌ Not recommended for pregnant women or individuals with photosensitive conditions.
🧪 Practice First: Before using on skin, practice on black paper to understand the device’s precision and power.

FAQ
Q: Does this device have a battery?
A: No, it is powered directly via USB and must remain connected during use.

Q: Is it safe for home use?
A: Yes, when used strictly according to the instructions—including anesthetic, goggles, and aftercare.

Q: Can I remove colored tattoos?
A: This device is designed for black and dark blue pigments only.

Q: How long until I see results?
A: Results vary. Some spots may darken immediately and fade over several days. Multiple sessions may be needed for optimal results.

Q: Can I use it on my face?
A: Yes, but avoid the eye area. Start with the lowest intensity and practice on paper first.

Q: How do I clean the device?
A: Wipe the tip gently with a soft cloth after use. Do not submerge in water.