The wonderful thing about recent developments in dermatology has been the do-it-at-home kits they have developed for various skin treatment instruments, and one of them is a high-frequency wand. You get the benefits of the spa treatment quickly and safely under your own roof!
This article will talk more about the benefits of high-frequency treatments and how to operate them to be effective and generally safer for your at-home spa experience. From tips and reminders spilled in between what to do before, during, and after the procedure, everything you need to know with high frequency wand. Sounds great? Let’s get started!
What is High-Frequency Treatment?
Once only used widely by professional dermatologists and estheticians, a high frequency facial wand is now being used at home with accessible kits designed to produce the same results. When used on the skin, it uses small currents and oxygenates the area. The oxygen, in turn, kills pimple-causing bacteria directly in contact with the wand.
There are also two kinds of high-frequency wand electrodes; the first is the high frequency wand for acne and oily skin, which is the Argon gas that is violet, the second one is Neon orange or yellow gas that has a lot of anti-aging benefits. However, recent studies have posed to the effectiveness of both electrodes to counter any skin problems.
Using a high frequency wand is a non-invasive and safe procedure to rejuvenate the skin, whether you are suffering from severe acne or wrinkles, to even hair loss! The increased blood flow and faster cell renewal from the heated surface increase the skin’s collagen and elastin levels.
What are the benefits of using a High-Frequency Wand?
You might have seen so many high-frequency wand before and after photos on the internet and have thought of getting the treatment or purchasing the best high frequency facial wand for home use money can buy. Here are some of the perks you could get from a high-frequency treatment.
- decreases redness and inflammation
- kills pimple-causing bacteria
- reduces hyperpigmentation (post-inflammatory hyperpigmentation or PIH)
- prevents acne and future breakouts
- increases blood flow on the treated surface of the skin
- shrinks pores
- oxygenates the skin
Although no studies have yet to prove the effectiveness of high-frequency treatment for acne, the benefits of high-frequency treatments, like killing acne-causing bacteria and reducing inflammation, helps with acne. At the same time, the benefits of increased blood circulation will boost collagen that is effective in anti-aging.
How to use a High-Frequency Wand?
Now that we got the rest of that information out of the way, it is now time to learn how to use your very own high-frequency wand.
Pre-Treatment
Step one: Preparing for your high-frequency wand facial
The first requirement to prepare for your high-frequency treatment is to clean your face thoroughly. Also, applying a layer of epidermal growth factor or EGF serum before the process would help not only with healing but also for the instrument to drag on the skin smoothly. Using any skincare with retinoids and harsh physical and chemical exfoliants should also be avoided a week prior to your high-frequency treatment.
During Treatment
Step two: A layer of protection
Use a small piece of gauze to use for the process. Using gauze will allow for an extra layer on top of your skin to help create more space for the electrode to form and give you fantastic benefits from the procedure.
Step three: Doing the facial treatment
If you are using a wand that needs an electrode to be inserted, insert it now. Place the bubble or the electrode over the gauze and turn the device on. If you have adjustable wands, turn up the dial until you feel a light tingling sensation.
Remember that it should not feel painful because turning the device on high might dry out the spot too much and cause skin irritation.
Step four: Using the device on an acne spot
In using your high-frequency wand, make a circular motion for each acne lesion. Work on the area for not less than three minutes but not more than five minutes.
There is also a method known as “sparking.” Done by tapping the acne a few times using the electrode’s tip. Once the tapping is done, do the process using the circular motions again.
Aftercare
Step five: Finishing
Once all the spots and surfaces are done and covered, finish by applying your moisturizer of choice on your entire face.
Some added tips:
- The high frequency skin therapy wand could cause redness, tingling, and sometimes swelling after the treatment. It’s nothing to worry about and would go away after 24 hours or a few days.
- Avoid harsh cleansers like physical exfoliants right after your procedure
- For people with oily skin, using a light water-based moisturizer would help after the treatment
- Avoid using the device for too long and using it in a higher setting because doing so would dry the skin and potentially make the acne breakout worse.
- The minimum time you could use your device safely is 15 to 20 minutes for the whole face and three to five minutes in a specific area, making the circular motion only once a day.
- High-frequency treatment for your face and neck is not recommended for people with heart problems and pregnant women.
- People suffering from skin ailments like eczema, psoriasis, and many more should avoid treating inflamed areas and avoid treating skin with broken capillaries and any spider veins.
- Also avoid skincare products with AHA or Glycolic Acid before and after your high-frequency facial treatment.
Final Thoughts
Dermatologists, estheticians, and many fans have attested to the fact that high-frequency procedures are effective for many facial problems. However, the acne benefits are still disputed, seeing as no further studies had been done to prove it. If you want to use a high-frequency treatment, especially at home, it is essential first to consult a dermatologist or an esthetician. But the results from high-frequency treatment fans are not lying, and there is no reason not to try!
